We all love our Bluetooth speakers, but if you’re not looking out for them, they could end up costing you more than just the initial investment. That’s because neglecting to check your speaker can cause it to age faster and eventually stop working altogether. Lucky for you, we’ve compiled a list of easy ways to make sure your speaker is in tip-top shape!
1. Check the Power Cord for Damage.
The most basic way to make sure your speaker is operating at its highest performance is to check the power cord. Check if there are signs of wear and tear and signs of overheating. If either of these is present, you need to replace the cord to keep your speaker alive! It should be done immediately and should not be ignored by those who have forgotten their cords somewhere else.
2. Test the Connection.
Next on our list is to make sure your Bluetooth device is connected to your speaker. While this may seem very obvious, it’s perfectly normal for speakers not to be connected at all times. If you’ve already tested this and the speaker still doesn’t work, you should test again with a different wireless device to be sure.
3. Rewire the Speaker’s Cord.
Once you’ve confirmed no problems with the power cord, all hope is not lost! If there’s a problem with the speaker itself, you shouldn’t ignore it. The next step is to rewire the speaker’s power cord. If you’re looking for expert advice on this, we recommend you go to your nearest electronics store and ask the personnel there. However, if you prefer to do it yourself, then here’s what you should do:
First of all, unplug the power cord from both ends. Then strip off a centimeter or two of insulation covering the electric wires inside. Then twist the wires together. After that, cover the wire with electrical tape to prevent it from short-circuiting. When you’ve finished this, plug it back into your speaker and turn it on! If there’s still no fix, you should replace the speaker altogether.
4. Check the Bass Port of Your Speaker.
The next step on our list is to check if your Bluetooth speaker produces bass sounds correctly. To do this, we’ll be testing its bass port by playing a bass-heavy song. The speaker should sound loud, clear, and crisp. However, if the music seems dull and muffled, then you might have to open up the port and clean it out. If it’s still not working, then you should consider buying a new Bluetooth speaker altogether!
5. Check if the Power LED Has Burned Out.
Last but not least is to check if your power LED has burned out. It should happen if you’ve experienced a power surge or if it has been left on for too long. If there’s no visible damage to the speaker, then you can turn off the power and wait for it to warm up. If this does not help, you can contact a professional repair person.
6. Check if The Speaker’s Sound Is Clear Enough.
To make sure the sound of your speaker is clear enough, you need to check it against several different Bluetooth speakers in your area. It should ensure that its sound quality is on par with the others. If it isn’t, you might want to purchase a new Bluetooth speaker! Sound quality is extremely important when buying a speaker, so this is something we recommend you keep in mind!
7. Make Sure Your Speaker Is Powered Correctly.
The last thing to keep in mind is that your speaker should be plugged into the correct outlet. Normally, any speaker plugged into an electrical outlet will make a clicking noise as it does so. If this does not happen with your speaker, it isn’t currently receiving power from the outlet. Therefore, you should check to ensure your speaker is not plugged into a wall outlet that does not provide proper power. If it still doesn’t work, then you’ll have to try different outlets until you can find one that works!
8. Check if the Charging Plugs are damaged.
Another failure indicator is a faulty charging port. It could be caused by a damaged power cord or excessive speaker usage while it’s connected to your device. However, make sure that the device isn’t connected to the speaker when you’re testing the charging port out. It will ensure that your speaker will not be harmed in any way! The best way to do this is to check if your charging port still works after you’ve turned it off.
Conclusion
We hope you’ll use this list to keep your Bluetooth speaker running smoothly! Remember to check up on it regularly to prevent your speaker from breaking. If you follow these simple steps, your Bluetooth speaker should last for a very long time. Good luck, and happy listening!
My last Bluetooth speaker was damaged because I drop it. The sound really changed good thing it’s under warranty and they replaced it. It was JBL by the way.